aluminum honeycomb core machine

 1.1 Introduction

The Coating& Stacking machine is the main parts within aluminum honeycomb core production line, the performance’s good or not will directly affect the products’ quality, this spreading machine adopt transverse intaglio coating,  It will finish spreading glue, drying, incision, congruence at one time. It has high working efficiency. Tension of Rewinding, feeding controlled automatically, deviation rectify automatically, scraper transverse to-and-fro moving, transversely automatically controlled by photoelectric system. And setup cutting width at random, glue groove has circle system and make viscose glue steady. join Core strip  use the technology of synchronization orientation hole, and make the orientation hole on the side of aluminum foil when print, when fold, you can according to the orientation hole to joint, the aluminum honeycomb core will order as well as the high precision

1.2 Technical data

1.2.1.Features:

1. Roll stands:

2. Pre-set the working specifications

3. Working condition and spec. Display

4. Auto sheets cutting automatically and stacking semi-automatically

1.2.2.Main Function:

Coat J-71 or other proper adhesive materials transversally

One set gluing roller is fixed in the machine for making one kind of honeycomb cell size.

The aluminum sheets are passing through oven after coated

The sheets are cut according to the settings

The sheets are transmitted by the belt and fixing the position with the help of operator

1.2.3.Main specifications

Coating speed: 2-12m/min

Heating system: room temperature 40--100°С

Width of the aluminum rolls: 600mm

Max. Cutting length:3500mm

Circumference of the gluing rolls: 720mm

Cutting precision:≤±0.15 mm

Power: 20KW